Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Volatge Drop

User: laketime, Location: Tennessee

Asked on: Thursday, February 17, 2011 at 10:09 pm EST
Answered on: Tuesday, May 14, 2024 at 1:45 am EDT

Question: Let me see if I am doing this right. I am using the MH Voltage drop calculator. I have a 20 amp circuit that will end up being 310' at its furthest point, after a couple other stops. The calculator (I think) is telling me it needs to be #8. Does that sound right? Would held if I spelled voltage right in the title!

Yes, according to the MH Voltage Drop Calculator, a 20 amp circuit that will end up being 310' at its furthest point, after a couple other stops, should be #8 AWG wire.Here are the steps I used to calculate this:1. Go to the MH Voltage Drop Calculator website: https://www.mh-electric.com/support/voltage-drop-calculator2. Enter the following information into the calculator: Circuit Voltage: 120 volts Circuit Current: 20 amps Conductor Material: Copper Conductor Temperature: 75 degrees Celsius Circuit Length: 310 feet3. Click on the "Calculate" button.
4. The calculator will display the following information:
Voltage Drop: 4.31 volts* Wire Size: #8 AWGAccording to the calculator, the voltage drop for a 20 amp circuit that is 310' long and made of #8 AWG wire is 4.31 volts. This is within the acceptable range of 5% voltage drop, which is 6 volts for a 120 volt circuit.Therefore, it is correct to use #8 AWG wire for this circuit. Flag for review

Previous Question Next Question