User: jimbo123, Location: Moore, OK
Asked on: Friday, February 18, 2011 at 5:37 am EST
Answered on: Tuesday, May 14, 2024 at 1:45 am EDT
Question: Can a qualify worker [maintenance machanic] who does not do electrical work who was in a 70e class and trained how to use a voltage tester for field training remove and replace a 480v motor of different hp? Would this be considered ok according to 70e or osha ? I asked my supervisor because he allowed this based on a buddy system. This was work for the electricians to spec out and do. There was not a breaker or starter or overload check before replacing. We're p***ed.How do you make a boss understand he made a mistake ?
70E and OSHA Requirements
According to the OSHA website, "only qualified persons should work on electrical equipment and circuits". A qualified person is defined as one who has "demonstrated skills and knowledge related to the construction and maintenance of electrical equipment and installations".70E requires that any employee who works on electrical equipment must be trained on the hazards of electricity and how to protect themselves from those hazards. This training includes how to use voltage testers, but does not replace the need for electrical training and experience.
Buddy System
The "buddy system" is not a recognized method of training or supervision under OSHA or 70E.
Specific Case
In this case, it is not considered safe for a maintenance mechanic who is not an electrician to remove and replace a 480v motor. This is because: The mechanic does not have the necessary electrical training and experience. The mechanic does not know how to select and use the correct equipment to work on the motor safely. The mechanic does not know how to properly test the motor before replacing it.
Talking to Your Boss
To make your boss understand the mistake, you need to: Be calm and respectful. Even if you are angry, it is important to present your concerns professionally. Explain the safety risks. Clearly state the reasons why it is unsafe for a non-electrician to work on the motor. Cite OSHA and 70E requirements. Refer to the specific regulations that require electrical training and experience. Offer solutions. Suggest that the mechanic be properly trained or that an electrician be called in to do the work. Document the conversation. Keep a record of the date, time, and what was discussed. This will protect you if there are any consequences.If your boss continues to insist that the mechanic is qualified, you can: Contact your local OSHA office. They can investigate the situation and issue citations if necessary. Refuse to perform the work. You have the right to refuse any work that you believe is unsafe. Flag for review