Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: LV under cab recessed puck lights

User: FVC electric, Location: Chapel Hill, NC

Asked on: Friday, February 18, 2011 at 7:46 am EST
Answered on: Tuesday, May 14, 2024 at 1:45 am EDT

Question: I have 10 recessed puck lights @ 20w each. They are wired with 2 tranformers rated at 150w each. I'm using m/c cable for the class 2 wiring. In NYC romex is not permitted. My question is do I need to provide fusing for the class 2 wiring to the puck lights? Thank you,

According to the National Electrical Code (NEC), which is enforced in New York City, fusing is not required for Class 2 wiring if certain conditions are met:1. Voltage Limit

The voltage of the Class 2 circuit must not exceed 60 volts RMS (root mean square).2.

Current Limit

The current on the Class 2 circuit must not exceed 5 amperes.3.

Short-Circuit Protection

The circuit must be protected against short circuits.

Your Scenario

The voltage of your Class 2 circuit is within the limit (it is 20 watts per light x 10 lights = 200 watts, divided by 150 volts = 1.33 amperes). The current on the circuit is also within the limit (it is 1.33 amperes).* The circuit is protected against short circuits by the transformers.

Conclusion

Based on the information provided,

fusing is not required for the Class 2 wiring to the puck lights in this scenario
. The circuit meets all of the NEC requirements for Class 2 wiring without fusing. Flag for review

Previous Question Next Question