Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Motion Sensors

User: Next Generation, Location: Birmingham Alabama

Asked on: Friday, February 18, 2011 at 10:03 am EST
Answered on: Tuesday, May 14, 2024 at 1:46 am EDT

Question: I have a job coming up where I am installing ceiling mounted motion sensors. The are above the ceiling is the cold air return. I understand that all cables and cable ties need to be Plenum rated. Can I make my low voltage terminations without a box? If I am able to do this do I need a special type of wirenut?

Can You Make Low-Voltage Terminations Without a Box?

Yes, it is possible to make low-voltage terminations without a box in certain situations. However, it is important to follow specific guidelines to maintain code compliance and safety.

Guidelines for Low-Voltage Terminations Without a Box



Verify Code Requirements

Local building codes may have specific requirements regarding low-voltage terminations. Check with the local authority to ensure compliance.


Use Plenum-Rated Components

All cables, cable ties, and connectors must be plenum-rated for use in return air spaces.

Secure Terminations

The wire connections must be securely made using a suitable method, such as wire nuts or crimp connectors.


Isolate Terminations

The terminations should be isolated from the surrounding cold air return space. This can be achieved by using insulation tape or shrink tubing.*

Label the Terminations

Clearly label the terminations with the function and circuit they belong to.

Special Type of Wirenut for Terminations Without a Box



Insulated Wirenuts

Standard insulated wire nuts are not typically plenum-rated. For terminations without a box in a cold air return, use wire nuts that are specifically labeled as "plenum-rated."

Note:
It is generally recommended to use junction boxes for any low-voltage terminations. They provide additional protection and organization, making it easier to troubleshoot and maintain the system in the future. Flag for review

Previous Question Next Question