User: augie47, Location: Tennessee
Asked on: Friday, February 18, 2011 at 11:50 am EST
Answered on: Tuesday, May 14, 2024 at 1:46 am EDT
Question: How would you address this situation.New construction, an enclosed overhead walkway between buildings.Plans call for metal roof decking, with Styrofoam on top insulation and a rubber roof.The plans also call for power conduits between buildings to be installed on top of the decking, surrounded by the insulation and then covered by the rubber roof.The install is under '05 NECK so 300.4(E) is not applicable even if it applies to this type install.It appears to me it is somewhat akin to installing conduit "in an oven".
Addressing the Situation1. Evaluate the Potential Hazards
Consider the high temperatures that may accumulate within the enclosed walkway, especially during summer months. Recognize the potential for electrical fires due to the close proximity of conduits to heat sources.
2. Review Applicable Codes and Standards
While 300.4(E) is not directly applicable, consider other relevant code sections, such as: [NFPA 70: National Electrical Code](https://www.nfpa.org/Codes-and-Standards/All-Codes-and-Standards/List-of-Codes-and-Standards/Detail?code=70) [NFPA 101: Life Safety Code](https://www.nfpa.org/Codes-and-Standards/All-Codes-and-Standards/List-of-Codes-and-Standards/Detail?code=101) [National Roofing Contractors Association (NRCA) standards](https://www.nrca.net/membership/publications/)
3. Consult with Experts
Engage with a qualified electrician and roofing contractor to discuss the specific installation requirements and potential hazards. Obtain professional guidance on the appropriate materials, installation methods, and safety measures.
4. Modify the Design or Installation
Based on the evaluation and consultation, consider the following modifications:
Relocate Conduits
If possible, install conduits outside of the enclosed walkway or in an area with better ventilation.
Provide Thermal Protection
Install thermal insulation around conduits to protect them from excessive heat.
Use High-Temperature Rated Conduit
Select conduit materials that are rated for higher temperatures.
Install Fault Protection
Incorporate appropriate fault protection devices, such as circuit breakers or fuses, to minimize fire risks.
5. Implement Safety Measures
Establish clear guidelines for the installation and maintenance of electrical systems in the walkway. Provide signage to warn personnel of potential hazards. Train personnel on the proper handling and operation of electrical equipment in the walkway.
6. Monitor and Inspect Regularly: Conduct regular inspections to ensure that the electrical systems are operating safely and that any potential hazards are identified and addressed promptly.* Monitor temperatures within the walkway to ensure they remain within acceptable limits. Flag for review