Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: lighting in plenum

User: gotmud, Location: some place cold

Asked on: Friday, February 18, 2011 at 1:00 pm EST
Answered on: Tuesday, May 14, 2024 at 1:46 am EDT

Question: ok so bear with me...What I have is a new detached residential pool house we are wiring...the owner is worried about the attic above molding from all the moisture sooo the heating company is making the attic a wild return to keep air flow rolling through up there...I see per 300.22 that I now have to run MC cable up there now but can't seem to figure from the wording about lighting....The pool house will have a 10' flat sheetrocked ceiling throughout and I want to install recessed cans all over. Now knowing the whole attic is a plenum area can I put the cans in??? or do I have to frame sealed boxes around all of them or ????? I guess I've never had the attic of a residential job a plenum and am confused on what I have to do....like I said I know I have to use MC for wire but what about lighing boxes and cans?? anything I have to know???? thanks guys (ohh and gals)

Plenum Wiring Considerations Wiring

Use Type MC (Metal-Clad) cable for all wiring within the attic plenum. MC cable provides a metal enclosure that prevents the release of flame and smoke in case of a fire.


Lighting Boxes

Use non-metallic lighting boxes labeled for use in plenum spaces. These boxes are designed to prevent the spread of smoke and fire.

Recessed Cans in a Plenum


Yes, you can install recessed cans in a plenum space, provided the following conditions are met: Airflow

The plenum space must be maintained as a wild return, meaning that there is sufficient airflow to prevent the accumulation of heat or moisture.


Non-IC Rated Cans

Use non-IC (Insulation Contact) rated recessed cans. IC-rated cans are designed to be installed directly against insulation, but they are not suitable for plenum spaces.

Sealed Boxes

Use non-metallic lighting boxes labeled for use in plenum spaces. Secure the boxes to the ceiling framing using screws or nails.


Tight Connections

Make sure all electrical connections are tight and secure. Use wire nuts or crimp connectors approved for use in plenum spaces.

Insulation Clearance

Maintain a minimum clearance of 3 inches between the recessed can and any insulation.

Additional Notes:
Seal any openings or gaps around the recessed cans and lighting boxes to prevent the entry of moisture or heat. Install a smoke detector in the attic plenum to detect any potential fires. Regularly inspect the attic plenum for any signs of moisture accumulation or damage. Flag for review

Previous Question Next Question