User: hilltop, Location: Logan, Utah
Asked on: Friday, February 18, 2011 at 2:15 pm EST
Answered on: Tuesday, May 14, 2024 at 1:47 am EDT
Question: Do insulated gloves used for PPE under NFPA-70E guidelines need to be sent out to a third party to be tested?If yes, does nayone have a lead on who to use?
Yes, insulated gloves used for PPE under NFPA-70E guidelines need to be sent out to a third party for testing.
NFPA-70E requires that insulated gloves be electrically tested on a regular basis to ensure they are still providing adequate protection. The frequency of testing depends on the type of glove and the severity of the electrical hazard.
Third-Party Testing Companies
Here are some third-party testing companies that can perform electrical testing on insulated gloves: Intertek
https://www.intertek.com/electrical-safety/
UL
https://www.ul.com/offerings/electrical-safety-testing
ETL
https://www.etl.com/categories/gloves/
CSA Group
https://www.csagroup.org/testing-and-certification/safety-certifications/electric-equipment-certification/canadian-testing
SGS
https://www.sgs.com/en/electrical-and-electronics/electrical-testing
Procedure for Testing Insulated Gloves
The following steps are typically involved in the testing process:1. The gloves are visually inspected for any signs of damage or wear.
2. The gloves are electrically tested using a high-voltage tester.3. The test results are recorded and a report is generated.If the gloves pass the test, they are considered safe for continued use. If the gloves fail the test, they must be replaced.
Frequency of Testing
The frequency of electrical testing for insulated gloves depends on the following factors: The type of glove (e.g., rubber, leather, nitrile) The voltage rating of the glove The severity of the electrical hazard* The manufacturer's recommendationsNFPA-70E recommends that electrical testing be performed on insulated gloves at least once per year. However, more frequent testing may be required in high-risk environments. Flag for review