User: ptonsparky, Location: NE (9.06 miles @5.9 Degrees from Winged Horses)
Asked on: Saturday, February 19, 2011 at 7:20 am EST
Answered on: Tuesday, May 14, 2024 at 1:48 am EDT
Question: On another forum I read about using a 480v drive to feed a motor wired for 240. Voltage to the motor is limited to 240v via custom parameter settings of the drive. What voltage should the disconnect be rated for at the motor? Ignore for now the interuption of load on the vfd.
480 volts Flag for review