Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Shared neutral amperage-3 phase system

User: bw9470, Location: W.N.C.

Asked on: Saturday, February 19, 2011 at 1:26 pm EST
Answered on: Tuesday, May 14, 2024 at 1:48 am EDT

Question: Okay i'm trying to figure out how to calculate a neutral load by using clamp to determine the amperage on the three phases and then calculate what the amperage on the shared neutral should be. . . for example- a=4.4A, b=3.6A, c=5.2A Should my neutral load be the sum of these?

No, the neutral load should not be the sum of the three phase currents. The neutral current is typically calculated as the vector sum of the three phase currents.

Formula

Neutral Current (In) = √3  (Phase Current A - Phase Current B - Phase Current C)


Example Calculation

Using your example values:
In = √3  (4.4A - 3.6A - 5.2A)In ≈ -2.4A
Therefore, the neutral current in this case would be approximately 2.4 amps.


Note:
The negative sign indicates that the neutral current is flowing in the opposite direction of the assumed positive direction. In balanced three-phase systems, the neutral current should be close to zero. Flag for review

Previous Question Next Question