Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: High and low speed motor.

User: kda3310, Location: Dry Prong, Louisiana

Asked on: Saturday, February 19, 2011 at 4:59 pm EST
Answered on: Tuesday, May 14, 2024 at 1:48 am EDT

Question: I have a 1.5hp, 2spd, 11a, 1ph, 110v at 60hz motor. (Hot tub motoer and pump) It has a high and low speed on the motor. On high speed I assume it is running at 60hz. Does it run less than 60hz on low and does it draw more amps with less hz?

Running Frequency

Your assumption is correct. On high speed, the motor runs at 60 Hz. On low speed, the motor typically runs at a reduced frequency, which is usually around 30 Hz.

Current Draw:
The current draw of an induction motor typically increases as the frequency decreases. This is because the motor has to draw more current to maintain the same torque at lower frequencies.Therefore, on low speed, the motor in your hot tub: Runs at approximately 30 Hz Draws a higher current (approximately 60% more) than on high speed (11 A * 1.6 = 17.6 A) Flag for review

Previous Question Next Question