Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Side Cutters, Chain Saw Oil

User: jmellc, Location: Durham, NC

Asked on: Monday, February 21, 2011 at 12:25 am EST
Answered on: Tuesday, May 14, 2024 at 1:50 am EDT

Question: I bought a pair of side cutters 2-3 years ago that were so tight I could not work with them. Oiled with different oils & grease, still tight. I came across them in the shed this past week & tried some chainsaw bar oil on them. Several hours later, they worked fine. Don't know what's in that oil, but it works well. Try that if you have similar issues with pliers.

Why Did It Work?

Chainsaw bar oil contains high-performance additives that offer: Extreme Pressure Lubrication

Protects against metal-to-metal contact and reduces friction.


Anti-Wear Properties

Forms a protective layer on metal surfaces, preventing wear and sticking.

Rust Inhibitors

Prevents corrosion, which can also contribute to tightness.


Water Resistance

Seals out moisture, which can cause the oil to break down.

How to Lubricate Side Cutters with Chainsaw Bar Oil

1. Clean the side cutters with a cloth or brush to remove any dirt or debris.
2. Apply a small amount of chainsaw bar oil to the joint area where the blades meet.3. Allow the oil to penetrate for several hours or overnight.
4. Wipe away any excess oil with a clean cloth.


Benefits of Using Chainsaw Bar Oil



Loosens Tight Joints

Lubricates and reduces friction, allowing the pliers to open and close smoothly.


Reduces Wear

Protects the metal surfaces from abrasions and extends the life of the pliers.

Prevents Rust

Seals out moisture and prevents corrosion, especially in humid environments.


Versatile

Can also be used to lubricate other tools such as wire cutters, bolt cutters, and screwdrivers.

Caution:


Avoid using chainsaw bar oil on tools with sensitive finishing, as it may damage the surface. Flag for review

Previous Question Next Question