Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Power fluctuations and draw down

User: rolandkee, Location: Mtn. Lake Park, MD

Asked on: Monday, February 21, 2011 at 9:06 am EST
Answered on: Tuesday, May 14, 2024 at 1:50 am EDT

Question: I work at a ski resort and we are having a power fluctuation problems that has been present for the last 3-4 years. We have a ski lift located just outside our maintenance office building and whenever it is on, it starts affecting our surge protectors and battery backups for our computer system, enough to cause some battery backups to die completely. At our 480v panel downstairs, we have a 75KVA 480v - 208y/120v 150C rise transformer that is used to supply power to the whole building. The 480v panel also supplies the power to the ski lift that affects our system. Measured voltage fluctuations are 107v to 155v.

Possible Causes of Power Fluctuations



Ski lift motor

The electric motor driving the ski lift may be causing voltage fluctuations due to its high power consumption and intermittent load.


Loose or damaged wiring

Inspect all wiring connections in the 480V panel and between the transformer and the ski lift motor. Loose or damaged connections can introduce voltage drop and fluctuations.

Transformer overload

The 75KVA transformer may be overloaded if the ski lift motor and other building loads draw excessive current. This can lead to voltage drop and fluctuations.


Resonance

Specific frequencies in the ski lift motor or other loads can resonate with the transformer's inductance, causing voltage spikes.

Grid conditions

Voltage fluctuations can also be caused by issues with the external electrical grid supplying the ski resort.

Steps to Diagnose and Resolve

1.

Monitor voltage fluctuations

Use a data logger or oscilloscope to continuously monitor the voltage at the 480V panel and near the ski lift motor. Identify the frequency and magnitude of the fluctuations.2.

Inspect ski lift motor

Check the motor's voltage rating, current draw, and wiring. Ensure that the motor is properly sized and wired to handle the load.3.

Test transformer

Perform a load test on the 75KVA transformer to verify its capacity and identify any potential overloading issues.4.

Upgrade electrical system

If the existing wiring or transformer is inadequate, consider upgrading the system with larger capacity components or installing voltage regulators to stabilize the fluctuations.5.

Contact grid operator

Check with the local grid operator to determine if any issues on their end may be contributing to the voltage fluctuations.

Additional Considerations:
Install surge protectors on all critical equipment to protect against voltage spikes. Use uninterruptible power supplies (UPS) to provide backup power in the event of power outages or severe voltage fluctuations. Educate staff about the potential hazards of power fluctuations and how to report them promptly. Flag for review

Previous Question Next Question