User: faresos, Location: California
Asked on: Monday, February 21, 2011 at 9:53 am EST
Answered on: Tuesday, May 14, 2024 at 1:50 am EDT
Question: Hello every one.....I have a question regarding the emergency power; Can we put the entire building (parking garage) on emergency power generator with one automatic Transfer Switch or I need to provide another ATS for life safety loads such as emergency lighting?Thanks,Sam
Typically, the entire building, including the parking garage, can be powered by one Automatic Transfer Switch (ATS) connected to an emergency power generator. However, there are specific requirements and exceptions that may necessitate the use of additional ATSs.
Building Codes and Standards
Most building codes require that emergency power systems provide backup power to essential electrical systems, including life safety loads such as emergency lighting and exit signs. The National Electrical Code (NEC) Article 700 defines life safety systems as those necessary for the protection of life and property, which typically include emergency lighting, fire alarms, and communication systems.
Exceptions and Scenarios
1. Legally Required Separation
In some jurisdictions, laws may mandate the separation of life safety loads from other electrical systems, even during emergency power operation. This may require a separate ATS for life safety loads.
2. Critical Loads
If the building has critical loads that require uninterrupted power, such as medical equipment or data centers, they may need a dedicated ATS to isolate them from potential power fluctuations or generator failures.
3. Load Balancing
In large buildings or complexes, it may be necessary to use multiple ATSs to distribute the load among multiple generators and provide redundancy. This helps balance the power demand and prevent overloading of the ATSs.
4. Generator Capacity
The capacity of the emergency generator must be sufficient to handle the combined load of the essential electrical systems, including life safety loads. If the generator is undersized, it may not be able to provide adequate power to all essential loads.
Recommendation:
It is generally recommended to consult with your local building inspector or a qualified electrical engineer to determine the specific requirements for your building. They can evaluate the building's size, occupancy, and electrical system to determine if additional ATSs are necessary. Flag for review