Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Disco Size

User: Alwayslearningelec, Location: NJ

Asked on: Tuesday, February 22, 2011 at 11:46 am EST
Answered on: Tuesday, May 14, 2024 at 1:53 am EDT

Question: What size disco would be required that is being fed from a step down 75kva transformer. The scenario is a 480a bus duct switch(size unknown) is feeding the 75kva transfromer which feeds the disconnect switch which feeds a panel(size unknown).

The information provided is not sufficient to determine the size of the disco that is required. Additional information, such as the following, is needed: The voltage of the bus duct switch The voltage of the disco The load that the disco will be supplying The efficiency of the transformer and disco* The power factor of the loadOnce this information is available, the following formula can be used to calculate the size of the disco:

Disco size (kVA) = Load (kVA) / Disco efficiency x Transformer efficiency x Power factor
For example, if the load is 60 kVA, the disco efficiency is 95%, the transformer efficiency is 98%, and the power factor is 0.9, then the disco size would be:
Disco size (kVA) = 60 kVA / 0.95 x 0.98 x 0.9 = 70.5 kVA
It is important to note that this is just a theoretical calculation and the actual size of the disco may need to be adjusted based on factors such as the available space and the specific requirements of the disco. Flag for review

Previous Question Next Question