Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Lowes Dryer Installation Qustion...

User: Chris Field, Location: Tennessee

Asked on: Tuesday, February 22, 2011 at 2:46 pm EST
Answered on: Tuesday, May 14, 2024 at 1:54 am EDT

Question: Ok first of all my name is Chris I recently purchased a Dryer from Lowes. The other one we had ended up crapping the bed blah blah. So we get the new Dryer hooked up by the delivery guys plug it in and the stove goes out wich was kinda fishy but we had a electrition come in a and he solved the problem with the kitchen fuse or what not. He noticed that the dryer was hooked up wrong I noticed myself cause in the Dryer cord installation manual it says to put the green wire to the green bolt. But the way they hooked it up was leaving the green wire in the middle and the white that was supposed to be replaced with the green they kept it were it was. Hope you guys are following what im saying. Wich the dryer worked perfectly w/o changing the green (ground) and white wires. But when we hook it up like the manual says it doesnt even kick on. Was wondering if anyone else noticed this.... And if so how do i fix this problem?

Electrical Safety Precautions

Always disconnect power from the dryer before performing any electrical work. Ensure that all electrical connections are made secure and meet electrical codes. If you are not comfortable working with electricity, consult a qualified electrician.

Troubleshooting Steps



1. Check the Power Source

Make sure the dryer is plugged into a grounded electrical outlet. Reset the circuit breaker or fuse that powers the dryer.

2. Double-Check the Wiring Connections

Inspect the wiring connections at the dryer terminal block. Ensure that the following wires are connected properly: Green (ground) wire to the green terminal screw White (neutral) wire to the white terminal screw Black or red (hot) wire to the brass terminal screw

3. Reverse the Green and White Wires (If Necessary)

In rare cases, some dryers may require the green and white wires to be swapped at the terminal block. Refer to the dryer's installation manual for specific instructions.

4. Check for a Faulty Ground

Using a multimeter, test the connection between the green wire and the frame of the dryer. If there is no continuity, there may be a faulty ground.

5. Check for a Blown Thermal Fuse

Some dryers have a thermal fuse that can blow if the dryer is overloaded or overheats. Locate the thermal fuse and check if it is blown (open circuit).

6. Reset the Dryer

Unplug the dryer for 60 seconds. Plug it back in and check if the issue has been resolved.

Additional Considerations:
If the dryer worked initially with the incorrect wiring, it could indicate a problem with the dryer itself. Always follow the specific instructions provided in the dryer's installation manual.* If the issue persists, contact the manufacturer or a qualified appliance repair technician for further assistance. Flag for review

Previous Question Next Question