Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: battery emergency light installing of surface of wall

User: GRIFF, Location: Virginia

Asked on: Wednesday, February 23, 2011 at 7:58 am EST
Answered on: Tuesday, May 14, 2024 at 1:56 am EDT

Question: Could you provide information for installing lighting circuits in a 3 rd floor comercial building. NFPA 730-2006 CAN B X CABLE BE USED DO THEY REQUIRE A SPECIAL CIRCUIT. The building is old . Thanks

NFPA 730-2006: Electrical Code for Buildings, Premise WiringCAN BX CABLE BE USED?

Yes, CAN BX cable (also known as Armored Cable) can be used for lighting circuits in a commercial building under NFPA 730-2006.

SPECIAL CIRCUIT REQUIREMENTS1. Continuous Protection

CAN BX cable must be protected by overcurrent devices (circuit breakers or fuses) at all times. The circuit breaker or fuse amperage must not exceed the cable's ampacity.

2. Grounding

The metal armor of CAN BX cable must be connected to the electrical grounding system of the building. This ensures a low-resistance path for fault currents and protects people from electrical shock.

3. Support

CAN BX cable must be properly supported by straps, clamps, or other approved means. This prevents sagging or damage to the cable.

4. Voltage Drop

The voltage drop in CAN BX cables must be within acceptable limits to ensure proper operation of lighting fixtures. Consult the cable manufacturer's specifications for maximum voltage drop requirements.

Additional Considerations for an Old Building



Cable Insulation

Ensure that the CAN BX cable insulation is in good condition and not brittle or cracked.


Building Code Compliance

Verify that the installation of CAN BX cable complies with all applicable local building codes.*

Professional Installation:
It is recommended to hire a qualified electrician to install the lighting circuits properly, including the selection and installation of appropriate CAN BX cables and overcurrent protection devices. Flag for review

Previous Question Next Question