User: JES2727, Location: NJ
Asked on: Wednesday, February 23, 2011 at 10:39 am EST
Answered on: Tuesday, May 14, 2024 at 1:56 am EDT
Question: I have a 150amp 120/208Y single phase panel that I need to boost to 230V.What size transformer(s) would be required to accomplish this? Would it be necessary to reduce the primary fusing and provide 150A fuses on the secondary? The panel is MLO.Thank you.
To boost the voltage from 120/208Y to 230V, you will need a 1:2 isolation transformer. The transformer should be rated for the same current as the panel, which is 150A.Since the transformer is an isolation transformer, the primary and secondary fusing will not need to be reduced. The 150A fuses on the secondary will still provide adequate protection.Therefore, you will need a 150A, 120/208Y to 230V, 1:2 isolation transformer to boost the voltage in your panel. Flag for review