Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Wire reduction

User: Brandon Loyd, Location: 3 Hr 2 Min from Winged Horses

Asked on: Wednesday, February 23, 2011 at 11:41 am EST
Answered on: Tuesday, May 14, 2024 at 1:56 am EDT

Question: Is it legal to trim strands from a wire that is oversized for voltage drop, to fit into the smaller lugs of a breaker?

No, it is not legal to trim strands from a wire that is oversized for voltage drop to fit into the smaller lugs of a breaker.

Reasons



National Electrical Code (NEC) Violation

Section 110.14(B) of the NEC states that "conductors shall not be spliced or terminated with twists, taps, or other splice methods that do not provide a permanent and secure connection." Trimming strands effectively creates a splice that does not meet this requirement.


Safety Hazard

Removing strands reduces the current-carrying capacity of the wire, which can lead to overheating and potential fire hazards.

Voiding of Warranties

Many wire manufacturers have specific installation requirements, and trimming strands may void the warranty on the wire.


Potential for Loose Connections

Over time, trimmed strands can loosen or break, leading to poor electrical contact and potentially arcing or overheating.

Alternative Solutions:
Use a wire size that is properly sized for the current demand and voltage drop. If necessary, use a different type of breaker or terminal that accommodates the larger wire size.* Consider using a wire splice that is specifically designed for use with stranded wire, such as a wire nut or ferrule. Flag for review

Previous Question Next Question