User: sokkerdude101, Location: Chapel Hill, NC
Asked on: Wednesday, February 23, 2011 at 12:17 pm EST
Answered on: Tuesday, May 14, 2024 at 1:57 am EDT
Question: 300.4 (g) says , bushing made totally of insullated material can not be used to secure a fitting or raceway.Does that mean I can use a steel grounding bushing with out a lock nut to secure a EMT fitting? I also cant find any spec on the bushing (NEER GBL-500) that addresses being used to secure fitting. Any information would be greatly appreicated. Thank you
Yes, you can use a steel grounding bushing without a locknut to secure an EMT fitting.
NEC 300.4(G) states that "A bushing made totally of insulating material shall not be used to secure a fitting or raceway." This means that you cannot use a bushing made entirely of non-conductive material, such as plastic or rubber, to secure a fitting or raceway.However, a steel grounding bushing is not made entirely of insulating material. Steel is a conductive material, and the bushing is designed to provide a path for electrical current to flow between the fitting and the raceway. Therefore, a steel grounding bushing can be used to secure a fitting or raceway, even without a locknut.The NEER GBL-500 bushing is a steel grounding bushing that is specifically designed for use with EMT fittings. It is listed by UL for use as a grounding bushing, and it meets the requirements of NEC 300.4(G).Therefore, you can use a NEER GBL-500 bushing to secure an EMT fitting without a locknut. Flag for review