User: transman2, Location: Brooklet,Ga.
Asked on: Wednesday, February 23, 2011 at 1:58 pm EST
Answered on: Tuesday, May 14, 2024 at 1:57 am EDT
Question: Can you splice a feeder cable between meter and inside panel for a home residence. If so where is it located in the code book. Thanks.
Yes, you can splice a feeder cable between the meter and the inside panel for a home residence.NEC Reference
[2020 NEC 300.13(B)](https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=70)
Location in the Code Book
Chapter 3: Wiring Methods and MaterialsArticle 300: Wiring MethodsSection 300.13: Conductors
Specific Requirements
The splice must be in an accessible location within the service equipment enclosure or outside. The splice must be made using an approved splicing device or method. The spliced conductors must be protected against physical damage. The splice and its enclosure must be protected from moisture and the effects of the environment. The splice must be made in accordance with the manufacturer's instructions.
Note:
It is important to follow all applicable code requirements and safety precautions when making electrical connections. If you are not qualified to perform this task, it is recommended to hire a licensed electrician. Flag for review