Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: CAT 5, Burial Rated, Fire Alarm Cable

User: jmellc, Location: Durham, NC

Asked on: Wednesday, February 23, 2011 at 6:24 pm EST
Answered on: Tuesday, May 14, 2024 at 1:58 am EDT

Question: I'm doing the office trailer at my church I mentioned recently in another category.They want me to bury conduits for phone/data, maybe fire alarm too. I may be limited to 1 1/4 PVC, as someone boring under the driveway is limited to 2" bit. I may be able to get 1 1/2, but doubtful, it is right at 2" OD.Anyone here familiar with CAT 5 rated for underground conduit/burial? How much thicker is it than standard CAT 5? How many could I get into an 1 1/4 conduit about 150 feet long with 3 90's? Do they make a CAT 5 with 25 pairs or so? If so, how thick is it?

Conduits for CAT 5 Cables

CAT 5 cables rated for underground burial are typically thicker than standard indoor cables due to additional protective layers. They may also be bundled together in a plenum cable to save space in the conduit. 1 1/4" PVC Conduit Capacity



Regular CAT 5

Approximately 7-9 cables, depending on the cable diameter.

Burial-Rated CAT 5

Approximately 5-7 cables, depending on the cable diameter and protective layers.

CAT 5 with Higher Pair Count


CAT 5 cables are typically available with 4 pairs of wires, but there are specialized cables with higher pair counts:
CAT 5e 25-Pair

Approximately 0.8 inches (20 mm) thick

CAT 6 25-Pair

Approximately 0.9 inches (23 mm) thick

Conduit Size Recommendations
1 1/4" PVC Conduit

Suitable for regular CAT 5 or burial-rated CAT 5 with up to 7 cables.

1 1/2" PVC Conduit

Recommended for CAT 5e or CAT 6 with higher pair counts, or for future expansion options.

Bending Radius


Consider the bending radius of the cables when planning the conduit layout. The minimum bending radius for CAT 5 cables is typically 10x the cable diameter, so a 1/4" cable should have a bending radius of at least 2.5".

Other Considerations
Use PVC conduit with sweep fittings to minimize cable damage during installation. Pull cables through the conduit using a fish tape or pull string. Seal all conduit entrances with watertight fittings to protect connections from moisture.* Consider using a conduit lubricant to ease cable pulling. Flag for review

Previous Question Next Question