Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: mechanical room or electrical room question?

User: idahodisco, Location: Chapel Hill, NC

Asked on: Thursday, February 24, 2011 at 9:31 pm EST
Answered on: Tuesday, May 14, 2024 at 2:01 am EDT

Question: I cant find it so I could be wrong but is their a code against hanging light with toggles attached to dry wall in a mechanical room or electrical room?

Yes, there is a code against hanging lights with toggles attached to drywall in a mechanical room or electrical room.National Electrical Code (NEC)



Article 404.14(A)
- "Lighting fixtures shall be securely supported by a mounting means." Article 404.14(B) - "Mounting means shall be of sufficient strength and rigidity to withstand the weight of the fixture and the vibration produced by the machinery or equipment in the room." Article 404.14(C) - "Mounting means shall not be made of wood or other combustible material."Toggle bolts are not considered a secure mounting means for lighting fixtures in mechanical or electrical rooms due to the following

Drywall is not strong enough to support the weight of heavy fixtures. Toggles can loosen over time, especially in areas with vibration. Lighting fixtures in mechanical and electrical rooms are often exposed to high temperatures and humidity, which can weaken drywall and toggle bolts.

Approved Mounting Methods



Suspended from overhead structure

Using chains, cables, or rods attached to a ceiling joist or beam.


Surface mounted on a backbox

Installed directly to a metal backbox secured to the wall.

Mounted on a strut channel

Installed on a metal strut channel attached to the wall.


Mounted on a concrete ceiling:
Using concrete anchors or expansion bolts. Flag for review

Previous Question Next Question