User: winslowfam, Location: VA
Asked on: Friday, February 25, 2011 at 7:57 am EST
Answered on: Tuesday, May 14, 2024 at 2:02 am EDT
Question: We are paying attention to the SCCR (short circuit current rating) of equipment purchased by our clients as we design the power supply to these panels....such as Air Compressors, HVAC equipment, etc. We want to ensure that the panels are rated for the available short circuit curent from the power system where the client wants it installed. When we ask the vendor or OEM for the SCCR of their equipment, we either get a "deer in the headlights" response or they give us a value like 5kA for the rating. This equipment is being fed from 480 volts, so the available short circuit curernt is always greater than 5kA...this forces us to installed current limiting fuses to limit the current these panels will see during a fault. Is this normal for the industry? Are OEM's really unaware of this problem?
It is normal for OEMs to be unaware of the SCCR requirements for their equipment, as they typically focus on the design and functionality of the equipment itself. The SCCR rating is a safety consideration that is primarily the responsibility of the electrical engineer or designer who is integrating the equipment into the electrical system.
Importance of SCCR
The SCCR rating indicates the maximum short-circuit current that the equipment can withstand without failing catastrophically. Exceeding the SCCR rating can result in equipment damage, fire, or explosion. Therefore, it is essential to ensure that the SCCR rating of the equipment is compatible with the available short-circuit current at the point of installation.
Determining SCCR
The SCCR of equipment can be determined through testing or calculation. Testing is typically performed by an independent testing laboratory. Calculation methods can be found in industry standards such as UL 508A or IEC 60947-1.
Current Limiting Fuses
Current limiting fuses are commonly used to limit the short-circuit current to a safe level for equipment with low SCCR ratings. By inserting a fuse with an appropriate current rating, the fuse will blow during a short circuit, interrupting the flow of current and protecting the downstream equipment.
Industry Practice
It is common practice in the industry to require OEMs to provide SCCR ratings for their equipment. However, OEMs may not always be able to provide accurate ratings, especially for older equipment. In such cases, the electrical engineer or designer is responsible for determining the SCCR rating based on the equipment's construction and component ratings.
Recommendations
To ensure the safety and reliability of your electrical system, it is recommended to: Request SCCR ratings from OEMs for all equipment. Verify the SCCR ratings against the available short-circuit current at the point of installation. Use current limiting fuses as necessary to protect equipment with low SCCR ratings. Collaborate with an experienced electrical engineer or designer to properly assess and mitigate SCCR concerns. Flag for review