Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Bakery load calculation

User: customelectric87, Location: Ohio

Asked on: Friday, February 25, 2011 at 8:51 am EST
Answered on: Tuesday, May 14, 2024 at 2:03 am EDT

Question: Guys-My customer wants an estimate on upgrading the wiring in a ex-barber shop. They plan to use the building as a small bakery. The existing service is 200A, 3 phase 120/208V with on 42 circuit panel. After reviewing article 220.20, I'm still a little unsure on the requirements. It's all electric, no gas. Can someone give me a load calculation example? I'm new to commerical work like this. Thanks.

Load Calculation Example for BakeryStep 1: Determine the Equipment Loads Oven: 30 kW Mixer: 10 kW Proofer: 5 kW Refrigerator: 2 kW Lighting: 3 kW Other appliances: 2 kWStep 2: Calculate the Total Load

Total Load = Sum of Equipment Loads = 30 kW + 10 kW + 5 kW + 2 kW + 3 kW + 2 kW = 52 kWStep 3: Apply Diversity Factor

Diversity factor (DF) accounts for the fact that not all equipment will be operating at full load simultaneously. For commercial buildings, a DF of 0.75 is typically used.Adjusted Load = Total Load x DF = 52 kW x 0.75 = 39 kWStep 4: Convert kW to kVA

kVA = kW / Power FactorAssuming a power factor of 0.85:kVA = 39 kW / 0.85 = 46 kVAStep 5: Calculate the Branch Circuit Loads

Based on the load calculation and Article 220.20, the following branch circuits are required: Two 3-phase, 4-wire, 208V circuits for the oven (30 kW or 40 kVA) Two 3-phase, 4-wire, 208V circuits for the mixer and proofer (15 kW or 20 kVA) One 3-phase, 4-wire, 208V circuit for the refrigerator and lighting (5 kW or 6 kVA) One 3-phase, 4-wire, 208V circuit for the other appliances (2 kW or 3 kVA)Step 6: Determine the Service Upgrade

The existing service is 200A, 3 phase 120/208V, which provides a total capacity of 48 kVA (200A x 208V x 1.732).The calculated load is 46 kVA. However, it is advisable to provide some buffer for future expansion.Therefore, a service upgrade to 60 kVA would be recommended.

Note: This is just an example, and the actual load calculation and service upgrade requirements may vary depending on the specific equipment and usage patterns. Flag for review

Previous Question Next Question