Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: RGS to LFMC Fitting

User: Mike01, Location: MidWest

Asked on: Friday, February 25, 2011 at 11:17 am EST
Answered on: Tuesday, May 14, 2024 at 2:03 am EDT

Question: I am trying to find a certain fitting and am not sure if it is available I want to transition from 1/2" RGS to Liquid tight flexible conduit but have not been able to locate the appropriate fitting?

Yes, it is possible to transition from 1/2-inch Rigid Galvanized Steel (RGS) conduit to Liquid Tight Flexible Conduit (LFMC). Here's how to do it

Fitting Required:

You need a 1/2-inch RGS Conduit to 3/8-inch or 1/2-inch LFMC Conduit Adapter Fitting.

Steps

1.

Cut the RGS Conduit

Cut the RGS conduit to the desired length and deburr the edges.2.

Screw the Adapter onto the RGS Conduit

Apply anti-seize compound to the threads of the adapter and screw it onto the RGS conduit. Tighten securely using a wrench.3.

Insert the LFMC Conduit

Push the LFMC conduit into the adapter. Ensure it is fully inserted and secure.4.

Tighten the Clamping Ring

Most adapters have a clamping ring that needs to be tightened to secure the LFMC conduit. Use a screwdriver or wrench to tighten it.

Note:
The size of the LFMC conduit you choose depends on the number of wires you plan to run through it. It's essential to use an adapter fitting specifically designed for transitioning from RGS to LFMC conduit.* LFMC conduit is not as durable as RGS conduit, so it's important to protect it from mechanical damage and avoid bending it too tightly. Flag for review

Previous Question Next Question