User: dana1028, Location: San Francisco Bay area
Asked on: Friday, February 25, 2011 at 2:44 pm EST
Answered on: Tuesday, May 14, 2024 at 2:04 am EDT
Question: Are there any AFCI breakers [2-pole] yet available for multiwire branch circuits?Thank you,
Yes, there are AFCI breakers [2-pole] available for multiwire branch circuits. They are typically referred to as "MWBC AFCIs" or "multi-wire branch circuit AFCIs." They are designed to be used in electrical panels where multiwire branch circuits are present.Here are some of the manufacturers that offer MWBC AFCIs: Siemens Eaton GE Schneider Electric* Square D
It is important to note that MWBC AFCIs are not as common as standard AFCIs. This is because multiwire branch circuits are not as common as standard branch circuits. However, if you need to install an AFCI breaker on a multiwire branch circuit, you will need to use a MWBC AFCI.I would recommend consulting with a qualified electrician to help you determine which MWBC AFCI is right for your specific application. Flag for review