User: vwdevotee, Location: Lockport, IL
Asked on: Friday, February 25, 2011 at 9:28 pm EST
Answered on: Tuesday, May 14, 2024 at 2:05 am EDT
Question: Good day all,Can any please point me to a website or good book that summarizes the colour cides used in foreign power systems? Right now I'm working on projects that will go to Brazil and China and would like to keep my drawings consistent with their standards. Thanks in advance!Cheers
Websites
IEC 60446:2010 (International Standard for Wiring Colors): https://webstore.iec.ch/publication/2176 IEEE Std 399-1997 (Recommended Practice for Industrial and Commercial Power Systems): https://ieeexplore.ieee.org/document/4022971 National Electrical Manufacturers Association (NEMA): https://www.nema.org/ Underwriters Laboratories (UL): https://www.ul.com/Books
National Electrical Code (NEC): https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=70 NFPA 79: Electrical Standard for Industrial Machinery (Chapter 12 covers color coding): https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=79 Electrical Wiring Handbook by Edward L. Safford (covers color coding in various countries)Specific Information for Brazil and China
Brazil
ABNT NBR 5410:2004 (Electrical Installations in Buildings - Low Voltage)China
GB 50303-2015 (Electrical Installation Code for Buildings) GB/T 18915.1-2014 (Basic Rules for Wire Color Identification in Electrotechnics)General Color Coding Standards
Typical Colors for Phases
Red
Phase A (L1)
Yellow
Phase B (L2)
Blue
Phase C (L3)
Typical Colors for Neutral and Ground
Green
Protective ground (PE)
Yellow-green
Protective grounding conductor (PEN)
Blue
Neutral conductor (N)
Note: These are general guidelines and may vary depending on the specific country or application. It is always best to refer to the relevant national or international standards for accurate information. Flag for review