Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Checking Old Wiring

User: Little Bill, Location: Tennessee NEC:2017

Asked on: Saturday, February 26, 2011 at 12:03 am EST
Answered on: Tuesday, May 14, 2024 at 2:05 am EDT

Question: I had a prospective customer ask if I could check out the wiring in an old house they are trying to buy, maybe built in the 20's or thirties. Other than visually checking the wires that I can see or get to easily, what is the best way to check them. I know to check continuity and for open or shorts. I guess I need to know the condition of the insulation of the wires. I don't have a megger, which I know that's what you should use if you can. I'm just starting out and don't want to buy every tool available until I get established (more coming in than going out). Are there some tricks that any of you use without using a megger? Also, I did look at some meggers and saw all types of voltage ranges, brands, and especially prices. What is a good reliable one that is not in the mega-bucks price range? Also, what voltage range meter would I need to look at?

Non-Megger Methods for Checking Wiring



Continuity Testing

Use a multimeter to check for continuity (or the absence of resistance) between terminals and outlets. This will indicate if the wires are physically connected.


Visual Inspection

Check for obvious signs of damage, such as frayed insulation, burnt connectors, or loose wires.

Thermal Imaging

Use a thermal imaging camera to detect hot spots, which may indicate overloads or potential issues with insulation.


Ground Fault Circuit Interrupter (GFCI) Testing

Install GFCIs in key areas to detect ground faults and potential insulation breakdown.

Insulation Condition Checks



Hipot Testing

While not recommended without specialized equipment, a hipot tester can measure insulation resistance by applying high voltage to the wires.


Flex and Bend Test

Gently flex and bend the wires to check for any cracking or damage to the insulation.

Voltage Range for Megger Testing

For residential wiring, a megger with a voltage range of 500V or 1000V is typically sufficient.

Recommended Megger



Fluke 1507 Insulation Tester

A reliable and affordable option with a voltage range of 1000V.

Additional Tips

Check the service panel for signs of corrosion or loose connections. Examine the condition of electrical fixtures and switches. Ask the homeowner about any known electrical issues or renovations made to the wiring.* Inform the homeowner of any potential concerns or recommended upgrades.

Note:
While these methods can provide some information about the condition of the wiring, they may not be as thorough as using a megger. It's always recommended to use a qualified electrician for a comprehensive inspection and assessment. Flag for review

Previous Question Next Question