Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: push button lockouts questions

User: jimbo123, Location: Massachusetts

Asked on: Saturday, February 26, 2011 at 7:09 am EST
Answered on: Tuesday, May 14, 2024 at 2:05 am EDT

Question: I have come across stop buttons with these lockout pins which is not in complience with company loto procedures, but they are still mounted to stop buttons through out the facility. Should 'nt these lockout devices be removed so employees don't use them which would give them a false sense of safety ?Is there any written rule to the removal of these devices ? Most people might know they should not use them for loto but can think just this one time they might save some time by using the stop button lockout.Thanks for they replies inadvance.

Yes, lockout devices that are not compliant with company procedures should be removed. Safety Hazard

Non-compliant lockout devices can pose a safety hazard by providing employees with a false sense of security. If an employee uses a non-compliant device, the machine or equipment may not be properly locked out and could start up unexpectedly, causing injury.


Compliance with Procedures

It is essential for employees to follow established lockout procedures to ensure safety. Using non-compliant devices undermines the integrity of those procedures and increases the risk of accidents.

Written Rule for Removal of Non-Compliant Devices

Most companies have written lockout procedures that specify the authorized types of lockout devices. If a non-compliant device is found, it should be removed immediately and replaced with a compliant device.

Removing Non-Compliant Devices


To remove non-compliant lockout devices:1. Identify non-compliant devices.2. Contact maintenance or other authorized personnel.3. Have the devices removed and replaced with compliant devices.4. Document the removal and replacement.Additional Steps to Prevent Use of Non-Compliant Devices



Educate employees

Train employees on the importance of using compliant lockout devices and the consequences of using non-compliant devices.


Regular inspections

Conduct periodic inspections to ensure that only compliant lockout devices are being used.

Enforcement

Establish clear consequences for using non-compliant lockout devices.


Encourage reporting:
Encourage employees to report any non-compliant lockout devices they observe. Flag for review

Previous Question Next Question