User: ken2lsi, Location: Texas
Asked on: Saturday, February 26, 2011 at 5:45 pm EST
Answered on: Tuesday, May 14, 2024 at 2:06 am EDT
Question: This question is how 680.42 pertains to a traditional portable spa or hot tub. Generally, as defined by part 1 of 680, these units meet the defenition of the following: stationary equipment, pool, self-contained spa or hot tub, self-contained theraputic tub or hydrotheraputic tank, spa or hot tub.These packaged units generally DO NOT meet the defenition of permanently installed swimming, wading, immersion, and theraputic pools.So, one would think that part 2 (permanently installed pools) of article 680 does not apply to your every day portable, self contained spa. Specifically, this means equipment grounding conductor can be bare as well as no required general duty GFCI outlet between 10 to 20 feet.Now if this is the intent of the code why does 680.42 (C) exist?I think 680.42 needs to be changed to say "...that would otherwise apply to permanently installed pools installed outdoors."
Explanation of 680.42(C)
Section 680.42(C) of the National Electrical Code (NEC) pertains to the grounding of a self-contained spa or hot tub, regardless of its portability. It states that grounding electrodes shall be installed in accordance with Part VI of Article 250 for all equipment interconnected in the spa or hot tub system.
Purpose of 680.42(C)
The purpose of this requirement is to ensure a reliable path to ground for all electrical equipment within the spa or hot tub system. This is essential for safety, as a proper grounding system helps protect against electric shock and prevents damage to the equipment.
Understanding the Exception to Part II
While portable spas and hot tubs generally do not meet the definition of permanently installed pools, they can still be considered permanently installed if they are connected to a plumbing or electrical service that is not easily removable. In such cases, they would be subject to the requirements of Part II of Article 680.However, the exception to 680.42(C) allows for the grounding electrodes to be installed in accordance with Part VI of Article 250 instead of the more stringent requirements of Part II. This is because portable spas and hot tubs typically have a smaller size and lower voltage than permanently installed pools.
Conclusion
Section 680.42(C) applies to all self-contained spas and hot tubs, including portable units. It ensures that these units have a reliable grounding system to protect against electric shock and equipment damage. While there is an exception for grounding electrodes, it does not exempt portable spas and hot tubs from the requirement to be properly grounded. Flag for review