Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Vacuuming a Rat

User: jmellc, Location: Durham, NC

Asked on: Sunday, February 27, 2011 at 1:57 am EST
Answered on: Tuesday, May 14, 2024 at 2:07 am EDT

Question: I'll soon need to vacuum a rat about 200 feet through an 1 1/4 PVC conduit. I don't have the fancy Greenlee vac. Has anyone tried a small shop vac for occasional use like this?

Using a small shop vacuum for occasionally vacuuming a rat through a PVC conduit may be possible, but it is not recommended. Here are some factors to consider: Suction Power

Shop vacuums typically have lower suction power than dedicated wire pulling vacuums like the Greenlee vac, which are specifically designed for the task.


Hose Diameter

Shop vacuums have smaller hoses than wire pulling vacuums, which can restrict airflow and make it difficult to pull the rat through the conduit.

Hose Length

Shop vacuums may have shorter hoses than wire pulling vacuums, making it difficult to reach the far end of a 200-foot conduit.


Debris Removal

Shop vacuums are not as effective at removing debris and sharp objects from the conduit, which can damage the rat or the conduit.If you must use a shop vacuum, here are some tips:

Use a Large Capacity Vacuum

Choose a vacuum with a large capacity to avoid frequent emptying.


Attach a Flexible Hose

Use a long, flexible hose to reach the far end of the conduit.

Use a Debris Filter

Install a debris filter in the vacuum to prevent small objects from damaging it.


Test the Vacuum

Run the vacuum before inserting the rat to ensure it has enough suction power.

Vacuum Slowly

Vacuum the rat slowly and gently to avoid damaging it or the conduit.

Safety Precautions



Wear Gloves and Safety Glasses

When handling the rat, wear gloves and safety glasses to protect yourself from bites and debris.

Inspect the Rat

Before vacuuming, inspect the rat for any sharp objects that could damage the conduit or vacuum.


Use a Pulling Sock with the Rat

To reduce the risk of damage, wrap the rat in a pulling sock before vacuuming.

Lubricate the Conduit

Apply conduit lubricant to the inside of the conduit to reduce friction.


Disconnect Power:
Disconnect the power to the conduit before starting to vacuum.Overall, it is recommended to rent or borrow a dedicated wire pulling vacuum for this task if possible. However, if you must use a shop vacuum, proceed with caution and follow the above tips to minimize the risk of damage or injury. Flag for review

Previous Question Next Question