User: hwhj, Location: New York, 40.7514,-73.9925
Asked on: Sunday, February 27, 2011 at 5:50 am EST
Answered on: Tuesday, May 14, 2024 at 2:07 am EDT
Question: 2 section of bus duct went faulty and was jumped out with 4 parallel conductors per phase, 1 conductor/jumper of each of 2 phases has a load 1/3 more than the other 3 conductors. I am getting mixed explanations. The jumpers are less than 20'. there are 16 jumpers. 4 each phase an a neutral. To me each phase group should be all equal if of equal length. But to be 1/3 higher? This is an apartment bldg. What's your theory?
Theory 1: Uneven Current Distribution Due to different impedances in the parallel conductors, the current may distribute unevenly. If one conductor has slightly higher resistance, it will carry less current, causing the other three conductors to carry more. This could lead to a 1/3 difference in the load carried by the conductors.
Theory 2: Harmonic Currents Non-linear loads, such as electronic devices, generate harmonic currents. These harmonic currents can cause unequal load distribution even in otherwise identical conductors. If one conductor has a higher inductance or capacitance, it could experience more harmonic current, leading to a higher load.
Theory 3: Conductor Length Variation Although the jumpers are stated to be less than 20', there may be slight variations in length between the conductors. Even small differences in length can affect the impedance of the conductors, leading to uneven current distribution.
Theory 4: Faulty Junction A faulty connection between one of the conductors and the bus duct or other conductors could cause a higher resistance at that point. This could increase the load on the conductor with the faulty connection and reduce the load on the other three conductors.
Possible Explanation for Your Situation
In an apartment building, there are typically many electrical devices operating simultaneously. The different types of devices, their usage patterns, and the wiring configuration can all affect the harmonic currents generated.It is possible that the 1/3 higher load on one conductor/jumper is due to a combination of factors, such as uneven current distribution, harmonic currents, and slight variations in conductor length.
Recommendation
To determine the exact cause, it would be recommended to conduct a more thorough inspection and testing, including measuring the conductor lengths, impedances, and current distribution. Flag for review