Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: cable connection to switchgear

User: bobsmith231, Location: Tennessee

Asked on: Sunday, February 27, 2011 at 1:13 pm EST
Answered on: Tuesday, May 14, 2024 at 2:08 am EDT

Question: when using tc cable in a cable tray and entering an indoor switchgear enclosure, is a strain relief connector required on the cable? can a chase nipple be used?

Strain Relief Connector

Yes, a strain relief connector is required on the cable entering an indoor switchgear enclosure. This is because: It prevents excessive bending or pulling forces on the cable, which can damage the cable and/or its terminations. It ensures that the cable is securely held in place, reducing the risk of accidental disconnection.

Chase Nipple

A chase nipple can be used in conjunction with a strain relief connector to further protect the cable. A chase nipple is a threaded fitting that is installed on the enclosure wall. The cable is then passed through the chase nipple and the strain relief connector is secured to the nipple. This provides additional support and protection for the cable.

Conclusion:


Both a strain relief connector and a chase nipple are recommended when TC cable enters an indoor switchgear enclosure from a cable tray. The strain relief connector is required to prevent excessive stress on the cable, while the chase nipple provides additional protection and support. Flag for review

Previous Question Next Question