Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Guying Service Masts

User: czars, Location: West Melbourne, FL

Asked on: Sunday, February 27, 2011 at 7:21 pm EST
Answered on: Tuesday, May 14, 2024 at 2:08 am EDT

Question: I routinely use 2 inch RMC at a height of 36 inches above the roof to maintain a distance of at least 18 inches between the drip loop and the roof with no guying being required. Is there an accepted residential service mast height above which they are required to be or should be guyed or braced IAW Article 230.28?

Yes, Article 230.28 of the NEC requires service masts to be guyed or braced or otherwise supported when they exceed a specific height. The height limit varies depending on the diameter of the mast and the type of support used.For a 2-inch diameter mast, the maximum height without guying is: 6 feet above the roof for masts supported by a single wall or structure 12 feet above the roof for masts supported by two or more walls or structuresIn your case, since your 2-inch mast is 36 inches (3 feet) above the roof, it exceeds the 6-foot limit for single-wall support. Therefore, it should be guyed or braced to comply with Article 230.28. Flag for review

Previous Question Next Question