User: AAEB, Location: Southeast Asia
Asked on: Monday, February 28, 2011 at 1:41 am EST
Answered on: Tuesday, May 14, 2024 at 2:08 am EDT
Question: good day!is EP smoke/heat detector required in a class 1 division 1 room???thanks in advance...
Yes, an Explosion-Proof (EP) smoke/heat detector is required in a Class 1 Division 1 room.In hazardous locations classified as Class 1 Division 1, all electrical equipment and wiring must be explosion-proof to prevent the ignition of flammable gases or vapors present in the atmosphere. This includes smoke and heat detectors, which must be designed and certified to meet the requirements of the applicable standards, such as UL 913 or ANSI/UL 864.EP smoke/heat detectors are constructed with special enclosures and components that prevent the release of sparks or other ignition sources that could ignite the flammable atmosphere. They are typically made of cast aluminum or stainless steel and have sealed joints to prevent the ingress of hazardous gases. Flag for review