User: puckman, Location: ridgewood, n.j.
Asked on: Monday, February 28, 2011 at 4:11 am EST
Answered on: Tuesday, May 14, 2024 at 2:09 am EDT
Question: Can employees who are not made a qualified worker by their employer be qualified for loto of 480volt mcc equipment ? Would this be osha acceptable ? According to company policy anyone can loto equipment as long as there is no electrical work by them . They had no actual training except for a meeting to change the loto policy. No one wears ppe when doing this.
OSHA Requirements
According to OSHA's Lockout/Tagout Standard (29 CFR 1910.147), employers must ensure that only "authorized and qualified persons" perform lockout/tagout (LOTO) procedures on energized electrical equipment.
Qualified Person
OSHA defines a qualified person as one who: Has the necessary knowledge and skills to understand the hazards involved in the task Can follow the established energy control procedures thoroughly Has demonstrated the ability to perform the required LOTO tasks safelyTraining and PPE
To be considered qualified, employees must receive proper training on LOTO procedures, including: Identifying and controlling energy sources Selecting and applying lockout/tagout devices Verifying the effectiveness of the lockout/tagout system Using personal protective equipment (PPE)PPE typically required for electrical work includes: Insulated gloves Insulated tools Flame-resistant clothing Face shieldEmployer Responsibility
It is the employer's responsibility to: Determine which employees are qualified to perform LOTO procedures Provide adequate training and PPE to those employees Establish and maintain a written energy control program that includes LOTO proceduresAnswer to Your Questions Can employees who are not made qualified workers by their employer be qualified for LOTO of 480volt mcc equipment? No, according to OSHA, only qualified employees are authorized to perform LOTO procedures on energized electrical equipment. Would this be OSHA acceptable? No, allowing unqualified employees to perform LOTO would be a violation of OSHA's Lockout/Tagout Standard and could result in serious injuries or fatalities. According to company policy anyone can loto equipment as long as there is no electrical work by them. This policy is not in compliance with OSHA regulations. All employees involved in LOTO procedures must be qualified, regardless of whether electrical work is being performed. They had no actual training except for a meeting to change the loto policy. No one wears ppe when doing this. The company is not meeting its responsibility to provide adequate training and PPE to employees performing LOTO procedures. This increases the risk of electrical accidents and injuries. Flag for review