User: a.bisnath, Location: Sacramento, CA
Asked on: Monday, February 28, 2011 at 7:08 am EST
Answered on: Tuesday, May 14, 2024 at 2:09 am EDT
Question: presently ,at short notice trying to build a 220 volt single phase to 220volt 3phase supply by making a static converter, I have arranged the contactors for start and run transition, the motor is 1 horse power,is there any way to try to determine the capacitor values for start and run beside trial and error?
Capacitor Value Calculation for Single-Phase to Three-Phase ConverterStart Capacitor Value
Estimate the motor's starting current: Is = (Horsepower 525) / Voltage Is = (1 525) / 220 = 2.38 A Capacitor reactance (Xc) for starting: Xc = Voltage / (2 pi f Is) Xc = 220 / (2 3.14 50 2.38) = 114.51 ohms Start capacitor value (Cs): Cs = Xc / (2 pi f) Cs = 114.51 / (2 3.14 50) = 362 µF
Run Capacitor Value
Estimate the motor's full-load running current: Ir = (Is 0.8) Ir = 2.38 0.8 = 1.9 A Capacitor reactance (Xc) for running: Xc = Voltage / (2 pi f Ir) Xc = 220 / (2 3.14 50 1.9) = 189.26 ohms Run capacitor value (Cr): Cr = Xc / (2 pi f) Cr = 189.26 / (2 3.14 50) = 602 µF
Note: Use capacitors rated for at least 250 volts AC. Choose the closest commercial capacitor values to the calculated ones.* It is recommended to use a trial-and-error approach to fine-tune the capacitor values for optimal motor performance. Flag for review