User: A/A Fuel GTX, Location: WI & AZ
Asked on: Monday, February 28, 2011 at 7:39 am EST
Answered on: Tuesday, May 14, 2024 at 2:09 am EDT
Question: I have a customer that has a tank heater which threads onto a flange at the bottom of a solvent tank. The heater is connected to its power source via 6 conductors in LFMC. When the tank is cleaned, the heater must be removed so the wires and LFMC must be disconnected so the heater will spin out of the flange. The customer wants me to figure out a way to quickly disconnect the assembly eliminating the need to unsplice the wires each time the tank is cleaned. My first thought was to take a piece of hard usage cord and a cord cap that would plug into a receptacle but I cant find a six wire configuration. Any ideas?????
Option 1: Custom Wiring Harness Create a custom wiring harness that includes a multi-conductor cable with six conductors and a mating connector. Install the mating connector on the heater side and connect the cable to the power source. When it's time to remove the heater, simply disconnect the mating connector.
Option 2: Quick Disconnect Couplers Use a set of quick disconnect couplers designed for electrical applications, such as those used in industrial machinery. Install the couplers on the ends of the LFMC cables and connect them to the heater and power source. When it's time to remove the heater, simply disconnect the quick disconnect couplers.
Option 3: Junction Box with Multiple Outlets Install a junction box near the tank and run individual cables from each conductor in the LFMC to separate outlets in the junction box. Connect the heater to a cord cap that plugs into the junction box. When it's time to remove the heater, simply unplug the cord cap from the junction box.
Option 4: Wireless Connection Use a wireless transmitter and receiver system designed for industrial applications. Connect the transmitter to the power source and the receiver to the heater. This eliminates the need for physical wiring connections altogether.
Option 5: Interlock Switch Install an interlock switch on the flange of the tank. Wire the switch to the power source so that when the heater is removed, the power is automatically shut off.* This prevents the accidental energization of the heater when it is not properly installed. Flag for review