User: tvg, Location: Portage, Indiana NEC: 2008
Asked on: Monday, February 28, 2011 at 10:03 am EST
Answered on: Tuesday, May 14, 2024 at 2:09 am EDT
Question: i work at a hospital and we have had an unusal amount of electricial equipment going out as of late, microwaves,heating elements,frezzers,ect. On my 120v system i have had readings of 127 to 129. On my 208v i have had readings of 220v. could this be a voltage problem?
Yes, the elevated voltage readings you have observed could be indicative of a voltage problem.120V System
Normal voltage range: 114-126V Your readings: 127-129V
208V System
Normal voltage range: 197-216V Your readings: 220V
Possible Causes
High voltage transformer
The transformer that steps up voltage for the building may be malfunctioning, causing an overvoltage condition.
Loose or corroded connections
Poor electrical connections can increase resistance and lead to voltage drops, which can result in elevated voltage at other points in the system.
Increased load
If there has been a significant increase in electrical demand on the system, it can overload the circuits and cause voltage spikes.
Brownout
A brownout is a temporary drop in voltage that can cause electrical equipment to malfunction. If this occurs, it can lead to subsequent overvoltage when power is restored.
Effects on Electrical Equipment
Elevated voltage can damage or shorten the lifespan of electrical equipment. It can cause: Overheating and insulation breakdown Arcing and electrical fires Reduced performance and efficiency Shortened life expectancy
Recommended Actions
Contact a qualified electrician
They can inspect the electrical system, identify the root cause of the problem, and recommend solutions.
Monitor voltage levels regularly
Use a voltmeter to monitor voltage levels at various points in the system and document any fluctuations.
Check electrical connections
Inspect all connections for tightness and corrosion. Tighten any loose connections and replace corroded terminals.
Reduce loads if possible: If there is a significant increase in electrical demand, consider reducing non-essential loads or upgrading the electrical system to handle the increased demand. Flag for review