User: shaw0486, Location: baltimore
Asked on: Monday, February 28, 2011 at 1:51 pm EST
Answered on: Tuesday, May 14, 2024 at 2:10 am EDT
Question: When you have removed an insert in a cellular metal floor. Is it permisable to permanently patch with concrete? I dont see anything in the nec stating this is not allowed.
NEC Reference
The National Electrical Code (NEC) does not specifically address the use of concrete for patching inserts in cellular metal floors.
From a Safety Perspective
Concrete patching can create a solid barrier over the insert, potentially obstructing access to the electrical conductors contained within. Concrete is a good conductor of heat, which can increase the temperature of the conductors and compromise their integrity.
From a Maintenance Perspective
Concrete patches can make it difficult to perform future repairs or modifications to the electrical system. Removing concrete patches is time-consuming and can damage the cellular metal floor system.
Recommended的做法
While the NEC does not explicitly prohibit the use of concrete for patching inserts, it is generally not recommended as a permanent solution. Instead, use the following methods:
Removable Patch Panels
Use patch panels specifically designed for cellular metal floors, which can be easily removed for access and maintenance.
Cellular Metal Inserts
Install new cellular metal inserts to replace the removed inserts, ensuring continuity and access to the electrical conductors.*
Non-Conductive Patching Materials
If concrete is unavoidable, use non-conductive patching materials, such as gypsum-based compounds or epoxy-resin fillers.
Conclusion:
While concrete patching may be a temporary solution, it is not considered a permanent or recommended method for covering inserts in cellular metal floors from a safety and maintenance standpoint. Use removable patch panels or cellular metal inserts to maintain access and safety. Flag for review