User: heyhi11, Location: Chapel Hill, NC
Asked on: Monday, February 28, 2011 at 5:48 pm EST
Answered on: Tuesday, May 14, 2024 at 2:11 am EDT
Question: Hey guys few questions, Im a owner of a building and i have 3 old fuse sub panels I want 2 change to breaker panels. I had some 1 look at it and hes charging me 250 each panel for labor plus material.Hes has his license, but im nervous with this stuff so tell me if this sounds rite. 3 fuse subpanels , 1 with 30 , 40 amp breakers that feed apartments, and 2 with 16, 40 amp breakers.He told me all he has to do is get 3, 200 amp guts with 40 amp breakers and put that in the exsisting box, and run a ground to the main. Is the price good and Is this true ? Im gonna get it inspected but dont want to run into trouble .
Pricing
The price of $250 per subpanel for labor is reasonable for a licensed electrician in most areas. The cost of materials will vary depending on the specific subpanels and breakers used, but it is generally between $50-$100 per subpanel.
Scope of Work
The electrician's description of the work involved is generally accurate. Here is a brief overview of what is typically involved in upgrading a fuse subpanel to a breaker panel: Remove the existing fuse subpanel. Install a new 200-amp subpanel with 40-amp breakers. Connect the new subpanel to the main panel with a feeder line. Install a ground rod and connect it to the new subpanel. Inspect and test the new subpanel.
Considerations
Wire Size
Ensure that the wire size used for the feeder line is appropriate for the amperage of the new subpanel.
Grounding
The electrician should verify that the grounding system is up to code and that the new subpanel is properly grounded.
Overcurrent Protection
The electrician should calculate the load on each subpanel and ensure that the breakers installed provide adequate overcurrent protection.*
Inspection
It is important to have the new subpanels inspected by a qualified electrical inspector to ensure that they have been installed and wired correctly.
Conclusion:
Based on the information provided, the price and scope of work appear to be reasonable. However, it is always advisable to get multiple quotes and check references before hiring an electrician. It is also important to ensure that all work is performed by a licensed and qualified professional and that the new subpanels are inspected and approved. Flag for review