Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Question on load shedding breakers???

User: jango, Location: Henrico County, VA

Asked on: Tuesday, March 1, 2011 at 9:48 am EST
Answered on: Tuesday, May 14, 2024 at 2:12 am EDT

Question: When it comes to load shedding and using load shedding breakers, is it just a matter of changing out existing standard circuit breakers and replacing them with load shedding breakers? Or is it a completely different system? Any insight on this and/or direction would be greatly appreciated.

Load Shedding Breakers vs. Standard Circuit Breakers

Load shedding breakers are specialized circuit breakers designed to automatically shed non-essential electrical loads during power outages or grid emergencies. They differ from standard circuit breakers in several ways

Functionality:
Standard circuit breakers protect against overloads (excessive current) and short circuits. Load shedding breakers prioritize essential loads (e.g., refrigerators, medical equipment) and disconnect non-essential loads (e.g., air conditioners, pool pumps) when there is a power shortage.

Operation

Standard circuit breakers are manually reset after tripping. Load shedding breakers are typically controlled by a central controller or utility remote signal that automates the load shedding process.

Installation

While both load shedding breakers and standard circuit breakers can be installed in a similar manner, there are some key differences:

Load shedding breakers require a dedicated wiring configuration.
They often connect to a separate controller or communication bus that triggers the load shedding process. Standard circuit breakers can be replaced directly. They do not require additional wiring or communication systems.

System Considerations

Implementing load shedding requires more than just changing out circuit breakers. It typically involves: Installing a central controller or communication system Mapping out which loads should be shed and prioritizing them* Ensuring compliance with local electrical codes and utility requirements

Recommendation

If you are considering installing load shedding breakers, it is

strongly recommended to consult with a qualified electrician
. They can assess your electrical system, determine the appropriate load shedding strategy, and ensure the installation is done safely and code-compliant. Flag for review

Previous Question Next Question