User: BACH Sign, Location: Chapel Hill, NC
Asked on: Tuesday, March 1, 2011 at 6:05 pm EST
Answered on: Tuesday, May 14, 2024 at 2:13 am EDT
Question: I have a job site converted 4 story factory turned into self storage units Historic section of San Franscio. Side walk is 10' wide to curd than wooden power poles that have (2) 12,000 volt lines. We have a 4' wide projecting sign from the side of the building. Pacific Electric refuses to drape the lines, they say drapes are no good over 1000 volts. They would be happy to move the lines for 50K,NOT AN OPTION.I can bring in a 200' Hydro crane set up in the center of the street, swing the sign 50' above the power lines than with guide ropes lower it right down the side of the building. My installers can work from a 55' knuckle boom to bolt the sign into place.The man basket would be 6' feet from the power lines.My first concern is worker saftey does anyone have any other ideals or saftey concerns or suggestions.Why would they not drape, I can find nothing in the NEC that would prevent it.I have site photos, but not a clue how to post then, but would email them to anyone that can help.BACH SIGN GROUPBobVice President /General Manager{Moderator's Note: Removed email address. Use the Private Message process, if you wish to contact this person.}
Safety Concerns
Electrocution
The close proximity of the man basket (6 feet) to the 12,000-volt power lines poses a significant risk of electrocution.
Dropping Objects
Swinging the sign 50 feet above the power lines may create a risk of dropping objects or tools onto the lines.
Wind
High winds could potentially interfere with the crane operation and make it more difficult to control the sign's movement.
Alternative Ideas
Use a Smaller Crane
Consider using a smaller crane with a shorter boom that can still reach the desired height without getting too close to the power lines.
Reduce Sign Size
Explore the option of reducing the size of the sign to make it easier to maneuver below the power lines.
Negotiate with Pacific Electric
Engage in further negotiations with Pacific Electric to explore alternative solutions, such as temporarily lowering the power lines or using a different draping material.
Safety Measures
Proper Grounding
Ensure that the crane is properly grounded to dissipate static electricity and reduce the risk of electrocution.
Proximity Sensors
Consider installing proximity sensors on the crane to alert operators if they get too close to the power lines.
Qualified Operators
Only use experienced and qualified crane operators who are familiar with the risks of working near high-voltage power lines.
Personal Protective Equipment (PPE)
Provide all workers with appropriate PPE, including rubber gloves and insulated clothing.*
Work Plan
Develop a detailed work plan that outlines the safety procedures, emergency protocols, and communication methods.
Regarding Drapes:
The NEC does not specifically prohibit the use of drapes over 1000 volts. However, it is generally not considered good practice to do so because drapes can degrade and become ineffective over time, potentially increasing the risk of arcing and electrocution. Flag for review