Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Smoke detectors low volt signal wire

User: Jim W in Tampa, Location: Tampa Florida

Asked on: Tuesday, March 1, 2011 at 11:42 pm EST
Answered on: Tuesday, May 14, 2024 at 2:14 am EDT

Question: Is there a violation to run a single thhn wire to interconnect smoke detectors. Situation is no way to run 14-3 between them but have 120 available in each room.

Yes, there is a violation.

National Electrical Code (NEC) Article 760.105(B) requires interconnected smoke detectors to be connected using a continuous multi-conductor cable. Article 402.2 prohibits the use of THHN wire as a single conductor.

Explanation THHN wire is a single-conductor wire designed for use in conduit. Interconnected smoke detectors require a continuous multi-conductor cable to ensure proper communication and power supply.

Solution

To comply with the NEC, you must use a continuous multi-conductor cable, such as 14-3 or 12-3, to interconnect the smoke detectors. Flag for review

Previous Question Next Question