Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Phone Relay

User: ptonsparky, Location: NE (9.06 miles @5.9 Degrees from Winged Horses)

Asked on: Thursday, March 3, 2011 at 9:40 am EST
Answered on: Tuesday, May 14, 2024 at 2:18 am EDT

Question: Customer has a hornrelay that pulls in when the phone rings. POS has worn out after 40 years or so. Any one have an idea for a replacement?

Potential Replacement Horn Relays



GE CR139C220001AA

12-volt DC relay with 4-pin configuration and 20-amp contact rating.


Omron G5LE-1A4P-DC12

12-volt DC relay with 4-pin configuration and 10-amp contact rating.

Findlay 174308-12V

12-volt DC relay with 6-pin configuration and 25-amp contact rating.


Arrow Hart 45034

12-volt DC relay with 4-pin configuration and 15-amp contact rating.

Potter & Brumfield KB12-12V

12-volt DC relay with 5-pin configuration and 20-amp contact rating.

Considerations for Replacement



Voltage Rating

Ensure that the replacement relay has a suitable voltage rating for the phone system (typically 12V DC).

Contact Rating

The contact rating of the relay should be equal to or higher than the current drawn by the horn.


Pin Configuration

Choose a relay with a pin configuration that matches the original relay.

Dimensions

Consider the physical dimensions of the relay to ensure it fits into the existing space.


Mounting

Determine the type of mounting required (e.g., panel mount, PCB mount) and ensure the replacement relay is compatible.

Additional Tips:
If the original relay is unavailable, consult the manufacturer or a qualified electrician for suitable replacements. Ensure proper wiring connections to avoid damage to the relay or phone system.* Consider using a relay with a higher contact rating than the original to provide a margin of safety and extend the lifespan of the relay. Flag for review

Previous Question Next Question