User: resistance, Location: WA
Asked on: Thursday, March 3, 2011 at 11:30 am EST
Answered on: Tuesday, May 14, 2024 at 2:18 am EDT
Question: I'm on my way to a service call, and would like some input before I get there. Here's what I know [had someone else go out before me]: 1. Voltage reading--using a digital meter--shows 120v when touching one probe to mobile home, and sticking the other probe in the dirt. 2. I had him turn off one breaker at a time, and he immediately found the circuit that's causing the problem. 3. I was told they had a person (non-electrician) over at the mobile home doing some wiring. 4.My guy says a number of wiring violations noticed at a few electrical boxes, he also noticed that one metal box shows a small spark when the EGC touches the metal box.The good news: We know which circuit.The bad news: It's a mobile home.any thought?
Potential Issues and Considerations
Grounding Issues
The voltage reading of 120V between the mobile home and the dirt suggests a grounding issue. The EGC (equipment grounding conductor) should be properly connected and not making contact with the metal box.
Wiring Violations
The wiring violations noticed in electrical boxes could indicate improper connections or undersized wiring. These issues can create fire hazards and safety concerns.
Non-Licensed Electrician
The fact that a non-electrician was doing wiring raises concerns about the quality of the work. Electrical work should always be done by licensed and experienced electricians.
Hidden Problems
Mobile homes often have hidden wiring issues due to their construction methods. Walls and ceilings may conceal wires, making it difficult to trace and identify problems.
Recommended Actions
Safety First
Ensure your safety by wearing appropriate PPE (personal protective equipment) and using a voltage tester to confirm the absence of power on the affected circuit.
Inspect Electrical Boxes
Open up the electrical boxes and carefully inspect the wiring for loose connections, damaged insulation, and any other violations.
Trace and Repair Grounding Issue
Locate the source of the grounding issue and ensure the EGC is properly connected to the metal box and all other grounding points.
Verify Wiring Compliance
Check all wiring in the affected circuit to verify it meets code requirements for size and type.
Identify Non-Licensed Work
Document any wiring that appears to have been done by a non-electrician.
Report Findings and Recommendations
Inform the homeowner of your findings and recommend any necessary repairs or improvements.
Additional Tips: Consider using a thermal imaging camera to identify areas with excessive heat that could indicate electrical problems. Take photos of the wiring violations and ground fault locations for documentation purposes.* Thoroughly test the circuit after making any repairs to ensure proper operation. Flag for review