User: gbarone, Location: Southampton, PA
Asked on: Thursday, March 3, 2011 at 7:33 pm EST
Answered on: Tuesday, May 14, 2024 at 2:20 am EDT
Question: I am running 2 #2 aluminum cables 800 feet from a 277/480volt source to a 277/480 volt 120/240volt 7.5 kva transformer. What is the largest breaker panel I can use off my secondaries? How many amps should I feel comfortable with drawing?
Voltage Drop Calculations
Using the voltage drop calculator formula:Voltage Drop = (2 x Distance x Amperage x Cable Resistance) / VoltageAssuming a maximum voltage drop of 5%:5% = (2 x 800 ft x Amperage x 0.0038 ohms/ft) / 480 VAmperage = 48
Breaker Panel Sizing
The largest breaker panel you can use on your secondaries is a 48-amp panel. This is because the maximum amperage available is 48 amps.
Recommended Amperage Draw
To ensure safe and reliable operation, it is recommended to draw no more than 80% of the maximum amperage available. Therefore, the recommended amperage draw is:Recommended Amperage Draw = 48 amps x 0.8 =
38.4 amps
This amps amount will allow for a margin of safety and prevent potential overload situations. Flag for review