User: mstephenson, Location: Ohio
Asked on: Friday, March 4, 2011 at 9:28 am EST
Answered on: Tuesday, May 14, 2024 at 2:21 am EDT
Question: I have a situation where a competing electrical contractor for a fairly good sized job has informed a potential customer that he can re-use an existing 12 year old 3000 amp switch gear with a 208/120 volt name plate and UL listing at 480 volts. The switches in the gear are rated at 600 volt. I have talked with one of the gear manufactures engineers and he said that the buss was probably rated at 600 volt, but they would not put that on paper or guarantee it at 480 volts. My questions is, Am I wrong in saying that using this gear would be a violation of the NEC code as it is not UL listed for use at 480 volts?
According to the National Electrical Code (NEC), electrical equipment must be listed for the voltage and other conditions under which it will be used. In this case, the switchgear is UL listed for use at 208/120 volts, but not 480 volts.Although the gear may be able to withstand the higher voltage, using it at 480 volts would be a violation of the NEC. The NEC is a safety standard that is enforced by law in most jurisdictions. Using equipment that is not listed for the intended use can create a safety hazard and may void insurance coverage.The competing electrical contractor is either mistaken or is trying to cut corners. You should inform the potential customer of the NEC requirement and advise them against using the existing switchgear at 480 volts. Flag for review