Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: AMTRAK Car Electrical System

User: dkidd, Location: here

Asked on: Friday, March 4, 2011 at 4:48 pm EST
Answered on: Tuesday, May 14, 2024 at 2:21 am EDT

Question: I recently took AMTRAK to Washington for work. There are 120 volt three wire convenience outlets at each seat. Having recently attending a Mike Holt Code Changes seminar, I had gotten a great deal (free) on an AEMC Outlet/GFCI tester. I was guessing that the outlets would be GFCI protected. When I plugged it in, only the center yellow indicator lit, indicating no ground. I took it into the restroom where there is a GFCI receptacle, and it didn?t have a ground either. Pressing the test button did not trip anything, since there was no connection to the ground prong.Information I found on AMTRAK car wiring states that the system is a 120 volt ungrounded delta, and that the outlets are GFCI protected.NEC states that it does not apply to rolling stock.Very strange. I?m still trying to figure out if it is safe or not, and whether the GFCIs would ever trip.Any thoughts?

Safety Considerations



Ungrounded Delta Power System

A delta system does not provide a ground reference, which means there is no path for ground fault current to flow. This raises concerns about electrical safety, as ground faults can go undetected and lead to electrocution or fire hazards.


Lack of Grounding

The absence of a proper grounding connection at the outlets creates an additional safety risk. Grounding provides a protective pathway for electrical currents to flow away from the user and equipment, preventing electrical shocks and reducing the risk of electrical fires.

Non-Functional GFCIs

The GFCIs installed on the train may not be functioning correctly due to the lack of a ground connection. Without a proper ground reference, GFCIs cannot detect ground faults and trip to interrupt the electrical circuit.

Code Compliance



NEC Applicability

As you noted, the NEC does not apply to rolling stock. This means that conventional electrical safety standards and regulations do not directly apply to trains.

AMTRAK Internal Standards

AMTRAK likely has its own internal safety standards and procedures for electrical systems on its trains. These standards may differ from the NEC and should be reviewed to determine the specific safety measures implemented.

Recommendations



Exercise Caution

It is advisable to exercise caution when using electrical outlets on trains that do not have a proper ground connection. Avoid using high-power appliances or sensitive electronics that require grounding for safety.

Contact AMTRAK

Reach out to AMTRAK's customer service or maintenance department to inquire about the safety of the electrical outlets and any specific precautions that should be taken.


Consider a Ground Fault Circuit Interrupter (GFCI)

Consider bringing your own portable GFCI and using it with your electronic devices. This will provide additional protection against electrical shocks in the event of a ground fault.*

Inspect the Outlets:
If possible, visually inspect the outlets for any damage or loose connections. Report any concerns to AMTRAK staff.Ultimately, the safety of the electrical outlets on AMTRAK trains is the responsibility of AMTRAK. It is recommended to follow the guidelines provided by AMTRAK and to use caution when using electrical devices on trains. Flag for review

Previous Question Next Question