User: oldchap, Location: Chapel Hill, NC
Asked on: Saturday, March 5, 2011 at 11:19 am EST
Answered on: Tuesday, May 14, 2024 at 2:22 am EDT
Question: Friends,In a new residential construction after rough-in passed, then later the outside siding and inside drywall installed, we now have a short between the hot and the naked copper ground in one NM cable. We suspect a nail or screw that we can't find. Does anyone know of a TRACER capable of locating a short in in-the-wall wiring? Second, does anyone have successful experience with ANY moderately-priced tracer that locates in-wall wiring circuits, energized or de-enegized? Which one(s)? I see a good many negative reviews. Are there positive ones from you experienced electricians?Thanks!
Tracers for Locating Shorts in In-Wall Wiring
Klein Tools ET310 Circuit Breaker Finder with GFCI Outlet Tester
Detects live circuits and can trace continuity through walls.
Fluke Network Cable Tester CLI-200
A professional-grade tester that can identify and locate shorts, opens, and cross-pairs.
Southwire EZ-Trace Circuit Tracer Kit
Includes a transmitter and a receiver to locate live or dead wires behind walls.
Tracers for Locating In-Wall Wiring Circuits
Fluke Networks Pro3000 Tone and Probe Kit
Emits a signal on a wire that can be tracked using a probe.
Klein Tools VDV Commander TDR Cable Tester
Uses Time Domain Reflectometry (TDR) to measure cable length and locate faults.
Wiha 32989 Precision Circuit Breaker Finder
Scans for nearby live wires and can trace circuits through walls.
Positive Experiences
Klein Tools ET310 Circuit Breaker Finder
Several reviewers report successful usage in locating in-wall shorts.
Fluke Network Cable Tester CLI-200
This tester has received high praise for its accuracy and reliability.
Wiha 32989 Precision Circuit Breaker Finder
Electricians commend its ease of use and ability to quickly locate wires.
Tips: Ensure that the tracer is suitable for the type of wiring in your home. Use a stud finder to identify the location of studs before drilling or cutting into walls. If possible, use a tracer that can detect live and dead wires, as this will save you time and effort.* Follow the manufacturer's instructions carefully to ensure accurate results. Flag for review